Valkyrie Class

From FEInfobase

Revision as of 11:12, 13 April 2006

The Valkyrie is a multi-functional attack fighter used by Starfighter Command. It was first introduced to Starfleet in 2380 and has proved itself to be a capable design in its two decades of service.

Introduction

The Valkyrie is designed to function in a multitude of environments as well as roles. To be capable in all the varied conditions the systems are designed with flexibility, versatility, and stability in mind.

Fighter vs. Fighter: Two twin phaser banks at the front of the craft give it a wide firing base and the targeting systems on the craft allow it to hit specific systems on larger ships. Typically the hard points not used, or is used to carry fuel for longer range missions. The extra mass reduces the maneuverability of the craft.

Fighter vs. Starship: Speed and maneuverability are used to keep the starship's weapons at bay. The Valkyrie typically targets systems on board the ship in able to gain an upper hand. The hard points can be outfitted with a munitions pod that can carry extra weapons such as micro torpedoes.

Ground Support Role: The Valkyrie can use thrust vectoring to fly lower and slower to support the friendly ground forces. The hard points usually outfitted with ground attack munitions of a varied kind, depending on the mission and environment.

Design History

2379:

August: Starfleet issues a brief for a new class of Fighter. General brief is as follows. Numerous, small, well armed, maneuverable craft, able to mass together to attack a target from several different directions. Also able to support ground forces, and counter the new Scorpion Class Attack Fighters of the Romulans. A maximum of warp 4 is required.

September: ASDB release a general idea to Starfleet initially coded the Valkyrie Class. The Project is approved. Design work completed and prototype begins construction

October: Basic space frame is laid out according to the design. Mini computer core installed. Micro Cochrane engine is designed and installed

November: Warp engine is fitted, computer core is deemed operational and basic testing on the Fighter begins.

December Ship passes all regulatory control and proceeds with testing.

2380:

January: Ship is proved to be operational and Starfleet examines the performance. The fighter is commissioned and Starfleet places an order for 400 Fighters to be distributed within the Federation.

Specifications

Classification: Fighter

Crew: 1

Propulsion:

Impulse Engines: 1

Warp Nacelles: 2

Cruising Speed: Warp 2

Maximum Speed: Warp 4

Emergency Speed: Warp 4.5 ( 30 minutes )

Normally, these fighter operate at impulse speeds and are delivered by a larger Starfleet vessel.

Weapons and Shields:

Phasers: Weapons cache on wing tips;

4 Type-J phaser emitters

3 Type-VII phaser banks (2 fore facing on the face of wing sides; 1 aft between impulse assemblies)

Micro Torpedoes:

Launchers: 1, forward

Casings: 8

Shields and armor: grid-projected (TDS)/distance-projected duranium with added ablative armor matrix

Dimensions:

Length: 11 meters

Width: 7

Height: 3 meters

Other Equipment:

One emergency transporter